Car Audio Speaker

By Chimezirim Chinecherem Odimba

A car audio speaker’s job is to convert the audio signal in its electrical form to a pressure wave that we can perceive as sound. Ideally, only one speaker per side is enough to reproduce the entire audio spectrum. But unfortunately, a speaker that can produce low frequencies has too much mass to be able to produce the higher frequencies. Speakers have not just an extreme range in quality and price but also have the greatest impact on the overall sound of a car stereo system.

How to buy a car audio speaker

• Ensure you take along with you a CD that you normally listen to when you audition the speakers. This will help you get a better idea of how the speaker reproduces sounds you are familiar with.
• Listen closely for low level details and how instruments sound.
• After narrowing down your choices to a couple of different speakers, audition them at length. A poor quality speaker has an exaggerated low and high end.
• Adjust the bass and treble as well as the volume to levels that are comfortable for you.
• Beware of salespeople that turn up the volume slightly on the expensive speakers and persuade you to buy them.

If you don’t want any modification in your existing speaker holes, buy speakers that fit in the current available space. Also keep in mind depth considerations, like in doors where speakers may interfere with windows rolling down.

Low Price With High Quality – Car Audio Speaker

By Keya Andrie

Speaker systems are an essential part of car audio system equipment. To get the best service that is possible you should look not only at the various car audio system equipment that are in the market but the car audio speaker reviews that you can find.

Now with the many cars audio system equipment reviews you should be able to judge what sort of car audio speaker will be working to your satisfactions. These reviews will in some cases inform you about certain aspects of the various car audio speakers that you can buy.

You may interest with this product Pioneer TS-A6872R 6 x 8 Inch 3-Way 240 Watt Speaker. From this car audio speaker reviews you can choose the car audio that you think might work best with your car and a great price as well.

Pioneer TS-A6872R 6 x 8 Inch 3-Way 240 Watt Speaker.

• 3-way 6″x8″ speakers (pair)

• Aramid fiber-reinforced carbon graphite IMPP woofer with butyl rubber surround

• 1-1/4″ laminated polyester fiber balanced dome midrange and 3/8″ PET silver film dome tweeter
• frequency response: 35-32,000 Hz
• recommended power range: 2-40 watts RMS

Pioneer has always delivered quality products. These speakers are awesome for the price. Excellent quality. Remember, when you buying speaker systems, one should have a detailed knowledge about Speakers and sound systems.

For more information please read Surround Sound Speakers.

Home Audio Speakers

Executive Summary About Audio Speaker By Ben Anton

Whether investing a large amount of your savings or a small part of your budget on your home theater, your speaker placement will play a big role in the sound quality and sonic performance in your home theater room.

CENTER CHANNEL SPEAKER

This speaker’s main purpose is to anchor sounds on-screen, like dialogue. Tips for placement of the center channel speaker:

1. Center it directly above or below your television.

2. If you place it above the television, the front edge of the speaker should line up precisely with the front edge of the television.

3. The tweeter of this particular speaker should be at the same height as the tweeters of the front speakers.

4. The front speakers and this particular speaker should be spaced the same distance away from your planned listening position.

FRONT SPEAKERS: BOTH LEFT AND RIGHT

These speakers have two distinct purposes. They reproduce stereo music sound while also handling a movie’s soundtrack. Tips for placement of the front speakers:

1. Find your optimal listening position. Now space the two front speakers at points in the room that are equal is distance to that position, with one to the left and one to the right. Don’t just eyeball this and get an approximate distance, as even an inch variation in the distance of the speakers can make a noticeable difference in your home audio system’s sound quality.

2. These speakers’ tweeters should be even to your ear level when seated in the optimal listening position. Smaller home theater speakers can be mounted on the wall or placed on a speaker stand. Floor standing speakers normally have this covered in their design.

SURROUND SPEAKERS

The purpose of the surround speakers is to provide low and high level sound from other parts of the room, creating a movie theater feel in your home theater. The surround speaker placement will depend on the size of your home theater, the shape of the room, and the space needed for the actual speakers. Be creative and experiment with the placement of these particular speakers throughout the room.

Tips for placement of the surround speakers:

1. Place the primary pair to the right and to the left of your optimal listening position. When placement to the side is impossible, or when you have a surround system with more than two surround speakers, you may wish to place the speakers behind the listening position, with the sound being directed toward the front of the room.

2. These speakers should be placed at approximately ear level when you are in a standing position.

3. Experiment with the aiming of these speakers when mounted on the walls.

SUBWOOFER

A home theater subwoofer provides your home audio system with all the low bass frequencies needed for a movie theater, surround sound experience. In most cases, you can position your home theater subwoofer anywhere in your home theater and still get good results. There is no one “perfect” placement for any given home theater speaker.

Please Check out our article you may be interested about Home Theatre Systems.

By: Levi Quinn

Car Audio Speakers

Purchasing a great set of new speakers to make a car’s audio system perform like a rolling concert is only the first step in enjoying the sound quality desired. To really make music, those speakers have to be installed. This is a job that many do-it-yourselfers can handle if they follow some basic instructions carefully. The task does require some patience and the right set of tools.

Getting Started

Before diving into installation of any type of car speaker, it’s a good idea to round up the right tools for the job. While installations can vary somewhat, the following tools are generally required:

-Screwdrivers, including Phillips head, magnetic and flat-blade;
-A drill and bits;
-Socket wrenches;
-Allen wrenches;
-Wire cutters;
-Soldering iron;
-Crimping tools;
-Door panel removal tool;
-Connectors;
-A file;
-Electrical tape;
-Torx drivers and bits.

Other tools may also be required, but the above will cover most basic installations.

Getting Down To Work

While other mounting positions may be desired, the most common do-it-yourself job involves putting in door speakers. This is one of the easiest jobs to tackle without calling in professional installation assistance.

For a door installation, make sure to collect the tools first and, of course, buy the speakers. Once these things are done, be absolutely certain to read the instructions that are packaged with the speakers. They should spell out everything that needs to be done to properly install the speakers at home.

While some of the steps might differ based on manufacturer recommendations and how much wiring work is required, these steps are common:

Removal of the door panel – This will be required for speakers that are door mounts, which is the most common scenario. The door panel will need to be completely removed in order to access the speaker cavity and perform the job.

Speaker removal – If old speakers are in place, they will need to come out before the new speakers go in. If a new wiring harness will be used, unplug the factory harness at this time. Otherwise, leave it in place. Glue preparation – Prepare the gluing or mounting material provided for the speakers per manufacturer instructions. If an adhesive doesn’t come with the speakers, a Super Glue type adhesive is a common choice. Once this is done, put the mounting materials into the speaker hole in the door.

Mounting – Place the speaker into mounting and make certain to carefully screw it into place.

Wiring – If the factory wiring harness is being reused, make sure to plug the positive wire into the positive opening in the new speaker. Do the same with the negative wiring. Also, make sure the positive and negative wires are properly plugged into the receiver or head unit. If a new harness will be used, this is the time to put it into place and hook it up to both the speakers and the receiver.

Clean up – Make sure all exposed wires are properly covered with electrical tape.

Finishing the job – Put the door panels back into place. For dash speakers, the major step that varies involves the removal of the grilles instead of the door panels. For other types of speaker installation jobs, carefully read manufacturer instructions before proceeding.

For furher information please read Surround Speakers.